Keralux® strong protector P

Extra protection against jeans stains!
Protects light colours, such as white and beige against colour transfer and premature staining. The Keralux® strong protector contains special active ingredients that protect the leather for a long time and effectively. The wear values are also improved, so that the leather stays beautiful for longer.

Attention: only for pigmented (covered/closed) leather, also only use on new or thoroughly cleaned leather.

Instructions:
You use the Keralux® strong protector twice a year, after normal maintenance with the Keralux® set P. This product does not replace normal maintenance, but complements it. The order is always the same:

1. Make sure the leather is dust-free. Use a vacuum cleaner with a soft furniture attachment, or a clean, soft cloth.
2. Clean the leather with the Keralux® cleaner from the Keralux® set P and then wipe the leather with a damp cloth.
3. Feed / protect with the Keralux® lotion from the Keralux® set P. A thin layer is sufficient.
4. Allow to dry thoroughly and then protect with the Keralux® strong protector. A thin layer is sufficient. 

Read the instruction manual carefully for any additional steps. Always try maintenance products (in general) on an inconspicuous place first.

Content:
Are you ordering this product separately? Then you will receive the following product:

• Keralux® strong protector (200ml)
• Cloth (2 pieces)
• Manual

The content is sufficient for 10+ seats (depending on model).
Expiration date: see packaging.

(!) Not suitable for:
Full aniline leather (natural smooth leather), raw leather (nubuck, velour, sanded leather), saddle leather (smooth leather with a wax and/or oil finish), artificial leather, vegetable tanned leather and leather tanned with olive leaf extract.

Check the maintenance advice per manufacturer, which can be found at the bottom of the homepage.

Questions?
Do you have questions about this product?
Then please contact us.